EFFECI TP 1832 1C 1S – year 2008

EFFECI TP 1832 1C 1S - Year 2008
Tempering Furnace
Working Dimensions 1800 x 3200 mm
Minimum dimensions 160x160 mm
Thickness 4-25 mm
Low-E
With convection
Production capacity load/h 20
Power 5 kW (Stand by) 180 kW (4mm)
Air consumption: 4 mc/min. (Convection)
Air pressure: 6 bar (Normal use) 8 bar (Maximum)

TAMGLASS HTF SUPER 2436 CT 20 L - Year 2008

TAMGLASS HTF SUPER 2436 CT 20 L - Year 2008
Forno di Tempera
Tempering Furnace
Low-E
Size 2400x3600 mm
Thickness 4-19 mm
Total Heating Power 249+249+660 kW
Working Power 750/800 kW

OLIVASTRI FK RCG

OLIVASTRI FK RCG
Roller kiln type FK Rcg 18/1200 for bending
of thermal glass
 temperature of 950 ° C
Useful dimensions of the bending chamber 1200x1200x600
Maximum dimensions of the sheets to be bent 1100x1100x4 mm
Minimum dimensions of the plates to be bent
300x300x4 mm
Heating and bending cycle
15 minutes
= Production 1 pack every 7 min. 30 sec.
Cold-cold cycle about 70 min.
Annealing cycle 7.5 min.
Cooling cycle 47.5 min.
Total length of the oven 17 meters
2 meter kiln entrance roller conveyor, advancement operation
fast intermittent
Preheat 1.4 meters, fast forward operation
slow
Heating 1.4 meters, slow and fast forward operation
1.4 m curvature, fast forward operation
slow fast
1.4 mt annealing, fast slow forward operation
rapid
Cooling 11.20 meters, feed operation
slow
- A movable diagram divides annealing from cooling
- Rolls diameter 60, center distance 120 ceramic,
(for fused silica only i in the heating and bending area + 5%)
- Mixed heating: electricity, gas
- n. 4 burners of 20,000 Kg / cal. with automatic ignition and flame control
- n. 2 self-regulated gas zones
- 0.75 kW combustion fan
- 0.75 kW smoke suction fan
- 20 kW bending resistors
Lower drilling template consisting of shaped cordirite plates inserted between the rollers and
resting on a plate that will be raised by means of a pneumatic piston having
a maximum stroke of 500 mm
Upper template with wings that close in case of particularly closed curvature.
A lifter keeps 1 glasses lifted from the rollers
curved in the annealing zone over time
of curvature, after which the diaphragm is raised and while
the newly curved glasses come
transferred in annealing, those from annealing are transferred
1n cooling.
The movement of the rollers is controlled by 2 gear motors controlled by inverters.
The 1st pulls the first six modules and has 2 two speeds:
1 °) the normal slow forward speed
2nd) transfer speed to the next section in fast 8 - 10 times higher than the 1st
- 2 meters of kiln feeding roller conveyor with operating drive motor reducer
intermittent
- 4 m of kiln unloading roller conveyor pulled by the 2nd kiln towing gearmotor

GLASCO 4-C1-T1-R1 - Year 2006

GLASCO 4-C1-T1-R1 - Year 2006
Glass Tempering Furnace
Low-E (Convection)
Hardenable thicknesses: from 4 to 19 mm
Minimum workable length: 280 mm
Maximum workable length: 4600 mm
Minimum workable width: 150 mm
Maximum workable width: 2600 mm
Weight from 0.42 to 570 Kg
Power:
- Resistors 919 kW
- Motors 818 kW
- Various 15 kW
Compressed air consumption:
- 1400 Nl / h
- Pressure 6 bar
Sulfur dioxide consumption:
- 0.5 - 1 l per hour
Overall dimensions (Machine):
- Length 30 m
- Width 8,30 m
- Height 2,70 m
Total dimensions (Switchboards)
- Lenght 13,20 m
Width 0,60 m
- Height 2 m

MAPPI AU 1F 1S 900 1800 O.4 R.S.A. - Year 2001

MAPPI AU 1F 1S 900 1800 O.4 R.S.A. - Year 2001
Tempering furnace
Working dimensions 900x2000 mm
Thickness 4-19 mm
Overall dimensions:
Lenght 10.440 mm
Width 2.330 mm
Height 2.210 mm
+ Fan
kW 107